Cartridge heaters

 
High load
Low load
 
High load
  • Megawatt

    The high-power cartridges manufactured by SANARA, S.A. belong to the latest generation of electrical heating elements and can apply a very high watt density in small spaces (50 W/cm2), thereby ensuring a high degree of reliability even under harsh operating conditions.

    d.jpg (12905 bytes)

    • With built-in thermocouple

      All MEGAWATT heaters can be manufactured with a built-in thermocouple.

      g.gif (2510 bytes)

    • Special constructions

      With non-heating section. Differentiated temperature.

      138_1.gif (2514 bytes)

      With protective sheath in flexible tubing

      138_2.gif (2612 bytes)

      Insulated with ceramic pearls

      138_3.gif (2446 bytes)

      With flexible cable

      138_4.gif (2495 bytes)

  • Superwatt

f.gif (4046 bytes)

  • Microwatt

Single-pole heater with one wire insulated from ground and the other welded to ground at the bottom. Can be manufactured with diameter of 4 or more, with maximum voltage of 48V.

c.gif (1734 bytes)

Low load

Cartridge heater with maximum density of 5 W/cm2.

e.gif (5906 bytes)

E-mail:webmaster@sanarasa.com
Copyright © 1999-2001 Sanara, S.A.  All rights reserved.
Last update: 7 January 2001.